EP-60R Fuel Flow Sensor image

EP-60R Fuel Flow Sensor

    • Replaces “EP-10 Fuel Flow”
    • Outputs
      •  Engine Parameters, Dynamic, PGN: 127489
        • Engine Instance
        • Fuel Flow
      • High Resolution Fuel Used, PGN: Proprietary
        • Tank Fuel Used
        • Trip Fuel Used
        • Seasonal Fuel Used
      • Fluid Level Alarm, PGN: Proprietary
        • Alarm Status
    • Must be configured by a Navico MFD or LMF gauge.

Cable Length:  10 ft.
Fuel Line Diameter:  3/8" (9.5 mm) Inside Diameter
Flow Rate Measured:  Optimized for 0.6-45 Gal/hr. but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr.; 1 PSI at 40 Gal/hr.
Installation Location:  Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Package: The EP-60R, LowranceNet T and 2 (two) 1" hose clamps
Fuel Type: Gasoline only. The EP-60R does not operate diesel engine fuel systems, or on any fuel system with a return fuel line or sump.
Hole required to route through a bulkhead: 7/8" (22mm)
Multiple EP-60R sensors possible: Yes (Up to 3 engines)

    Our network of expert dealers can help you choose the right product for your boat. Find a dealer near you.
    Search for the answer you are looking for or download many of our manuals available online. Read product articles, watch product videos or locate a dealer for support.